|
 |
PRO-WHEEL MANDREL
The PRO-WHEEL MANDREL has several advantages over
standard wheel mandrels. A CENTERING CONE is built
into the screw assembly. This helps center the wheel in
the tool providing a great work center for cutting, sanding
or polishing your wheel. There is also a step cut in the
body of the tool for mounting B.S.A. wheels in reverse for
polishing the inner edge. The PRO-WHEEL MANDREL also
has an easy grip screw that makes it easy to apply
and remove without the use of tools.
 Instructions are included.  TOP
|
Item #H103
"Compare and Save"
"New
Prices!"
Was $8.25
NOW
$6.50
|
|
 |
PRO-HUB TOOL
The PRO-HUB TOOL is a precision machined steel tool
designed to perform 3 operations to improve the performance
of your wheels.
1. Hub Squaring - Squares wheel hub to bore.
2. Hub Coning - Cones inside hub face to reduce contact
friction against the body.
3. Bore Reaming - Reams undersized bores.
The PRO-HUB TOOL includes one piece of fine grit
(220) sandpaper and one piece of coarse (600) grit sandpaper
along with instructions for use. TOP
|
Item #H100
"Compare and Save"
"New
Prices!"
Was $9.00
NOW
$8.25
|
|
|
|
 |
PRO-BODY TOOL 2
Axle holes must be square to the body and straight for top
performance. The PRO-BODY TOOL 2 helps you do just
that. This is a precision drill guide. No need for a precise,
plum drill press. The PRO-BODY TOOL 2 lets you drill
precision holes and align existing slots using only a hand
drill.
The NEW
PRO-BODY TOOL 2 has a THIRD HOLE
for a raised wheel design. 3 wheels touching has been shown
to improve performance by reducing track contact area and
effects of vibration and misalignment. Be sure to
check your rules to make sure a raised front wheel is allowed.
The PRO-BODY TOOL has guide holes for BSA, PineCar,
and other kits requiring #44 drill bit (included).
All instructions are included TOP
|
Item #H107
"Compare and Save"
"New
Prices!"
Was $10.25
NOW
$9.95
|
|
|
|
|
NEW PRO-WHEEL
SHAVER XT
The Pro-Wheel Shaver XT is just like the II but with a new
"twist". The twist is in the adjustable blade.
The allows you to make finer adjustments to the cut depth
without having to loosen the blade. As with the Pro- Shaver
II, It is intended for use on wheels made from relatively
hard plastic, such as those offered by BSA, PineCar, Royal
Rangers, S&W, and Royal Ambassadors. It it NOT
intended for wheels made from relatively soft plastics such
as those offered by Awana and PinePro.
All instructions are included.
NOTE: In order to use the Pro-Wheel Shaver XT you
must have the H100 Pro-Hub Tool(see above).
TOP
|
Item #H106
"Compare and Save"
"New
Prices!"
Was $32.50
NOW
$29.95
Add a Pro- Hub Tool
Item #H106SET
"Compare and Save"
$38.20
|
|
|
|
 |
12 PIECE NEEDLE FILE
SET
Great for axle work or fine detail work. Each 6" file
has a poly grip handle for comfort and comes in a handy
storage pouch. Any hobbyist will find 1001 uses.
TOP
|
Item #H110
"New
Prices!"
Was $6.25
NOW
$5.75
|
|
 |
#14 LEAD HOLE DRILL (25/64")
The 25/64" drill is 1/64" over 3/8" and is for the 3/8"
lead wire holes. <TOP
|
Item #H14
$6.50
|
|
 |
.086 AXLE HOLE DRILL (#44)
The #44 drill bit (decimal equivalent is .086") is for the
new Scout axles and my Speed Axles III. It is also usable
with the other Pinewood Derby axles.
TOP
|
Item #H34
$1.60
|
|
 |
SANDPAPER
Six sheets (4-1/2" x 5-1/2") of Aluminum Oxide sandpaper,
the type cabinet makers use. Two sheets each of medium (100
grit), fine (150 grit) and very fine (220 grit). Easily
enough for shaping and smoothing a Pinewood Racer
TOP
|
Item #H07
$1.65
|
|
Click on the movie icon to see and instructional
video on how to use the tools (.wmv format).
Depending on the speed of your connection,
it may be best to "right click"
on the movie icon and select "save target
as" to save the file to your computer
for viewing. These are great for learning
what is involved in using the tools.
Internet
Content
